VFR
UT80
HAMILTON FORT RANCH
CEDAR CITY, UT
Elevation
5,460 ft
Control
Uncontrolled
UNICOM
122.80
Runway
4,100 ft
About Hamilton Fort Ranch
Hamilton Fort Ranch, identified as UT80, is a privately owned, non-towered airfield in Cedar City, Utah. The field has one runway, 18/36, measuring 4,100 by 70 feet with a turf surface.
There are no published instrument approaches here, so operations are conducted under visual flight rules. Field communications are conducted on UNICOM 122.8 MHz. There is no fuel service on record here. The field is designated private use, so landing requires prior permission from the owner.
Field elevation is 5,460 feet above mean sea level. Given the field elevation, pilots should watch density altitude on hot days.
07
Questions
- Where is Hamilton Fort Ranch (UT80) located?
- Hamilton Fort Ranch is located in Cedar City, UT.
- Is Hamilton Fort Ranch a public or private airport?
- Hamilton Fort Ranch (UT80) is a private-use airport, so prior permission from the owner is required before landing.
- How many runways does Hamilton Fort Ranch have?
- Hamilton Fort Ranch has a single runway, 18/36 at 4,100 feet of turf.
- What is the field elevation at Hamilton Fort Ranch?
- Hamilton Fort Ranch sits at 5,460 feet above mean sea level.
- Does Hamilton Fort Ranch have an instrument approach?
- No, Hamilton Fort Ranch has no published instrument approach procedures; it is used under visual flight rules.
- Does Hamilton Fort Ranch have an air traffic control tower?
- No, Hamilton Fort Ranch (UT80) is a non-towered airport; pilots self-announce on the CTAF.
- What is the UNICOM frequency at UT80?
- Hamilton Fort Ranch's UNICOM frequency is 122.8 MHz.