VFR
UT10
CEDAR VALLEY
EAGLE MOUNTAIN, UT
Elevation
5,000 ft
Control
Uncontrolled
Runway
5,100 ft
About Cedar Valley
UT10 identifies Cedar Valley, a privately owned, non-towered airport in Eagle Mountain, Utah. The airport is served by a single runway, 17/35, which measures 5,100 by 100 feet with a gravel surface.
Operations are VFR only since no instrument approach procedures are published for the field. With no control tower or published frequencies, pilots maintain their own separation using see-and-avoid procedures. No fuel service is listed. As a private-use facility, the airport is not open to transient traffic without prior permission.
The field rests at 5,000 feet above mean sea level. At that elevation, density altitude is a routine consideration in warm weather.
06
Questions
- Where is Cedar Valley (UT10) located?
- Cedar Valley is located in Eagle Mountain, UT.
- Is Cedar Valley a public or private airport?
- Cedar Valley (UT10) is a private-use airport, so prior permission from the owner is required before landing.
- How many runways does Cedar Valley have?
- Cedar Valley has a single runway, 17/35 at 5,100 feet of gravel.
- What is the field elevation at Cedar Valley?
- Cedar Valley sits at 5,000 feet above mean sea level.
- Does Cedar Valley have an instrument approach?
- No, Cedar Valley has no published instrument approach procedures; it is used under visual flight rules.
- Does Cedar Valley have an air traffic control tower?
- No, Cedar Valley (UT10) is a non-towered airport; pilots self-announce on the CTAF.