VFR
L06
FURNACE CREEK
DEATH VALLEY NATIONAL PARK, CA
Elevation
-210 ft
Control
Uncontrolled
CTAF
122.90
Runway
3,065 ft
About Furnace Creek
Furnace Creek, L06, is a publicly owned, non-towered airport in Death Valley National Park, California. One runway, 15/33, spans 3,065 by 70 feet of asphalt. Visual flight rules only here. No instrument approaches are published. Pilots coordinate on CTAF 122.9 MHz. The field rests at -210 feet above mean sea level.
07
Questions
- Where is Furnace Creek (L06) located?
- Furnace Creek is located in Death Valley National Park, CA.
- Is Furnace Creek a public or private airport?
- Furnace Creek (L06) is a public-use airport, open to general aviation.
- How many runways does Furnace Creek have?
- Furnace Creek has a single runway, 15/33 at 3,065 feet of asphalt.
- What is the field elevation at Furnace Creek?
- Furnace Creek sits at -210 feet above mean sea level.
- Does Furnace Creek have an instrument approach?
- No, Furnace Creek has no published instrument approach procedures; it is used under visual flight rules.
- Does Furnace Creek have an air traffic control tower?
- No, Furnace Creek (L06) is a non-towered airport; pilots self-announce on the CTAF.
- What is the CTAF frequency at L06?
- Furnace Creek's CTAF frequency is 122.9 MHz.