VFR
9WA3
RIVER BEND
RIVER BEND LODGE, WA
Elevation
2,040 ft
Control
Uncontrolled
UNICOM
122.80
Runways (2)
5,000 ft
About River Bend
River Bend, identified as 9WA3, is a privately owned, non-towered airport serving River Bend Lodge, Washington. The airport's 2 runways include 04W/22W at 5,000 feet long by 100 feet wide of water, alongside Runway 03/21 at 3,750 feet long by 60 feet wide of turf and dirt.
All operations are conducted under visual flight rules since no instrument approach procedures are published. Relevant frequencies for the field include UNICOM 122.8 MHz. There is no fuel service on record, and as a private-use facility, transient pilots cannot land without prior permission.
The field rests at 2,040 feet above mean sea level.
07
Questions
- Where is River Bend (9WA3) located?
- River Bend is located in River Bend Lodge, WA.
- Is River Bend a public or private airport?
- River Bend (9WA3) is a private-use airport, so prior permission from the owner is required before landing.
- How many runways does River Bend have?
- River Bend has 2 runways. The longest is 04W/22W at 5,000 feet of water, alongside 03/21.
- What is the field elevation at River Bend?
- River Bend sits at 2,040 feet above mean sea level.
- Does River Bend have an instrument approach?
- No, River Bend has no published instrument approach procedures; it is used under visual flight rules.
- Does River Bend have an air traffic control tower?
- No, River Bend (9WA3) is a non-towered airport; pilots self-announce on the CTAF.
- What is the UNICOM frequency at 9WA3?
- River Bend's UNICOM frequency is 122.8 MHz.