VFR
7IN2
FLYING CROWN
HAMILTON, IN
Elevation
920 ft
Control
Uncontrolled
Runway
2,800 ft
About Flying Crown
7IN2 identifies Flying Crown, a privately owned, non-towered airport in Hamilton, Indiana. The airport is served by a single runway, 18/36, which measures 2,800 feet long by 100 feet wide with a turf surface.
Operations are under visual flight rules only, as no instrument approach procedures are published. The field is non-towered with no published frequencies, so pilots keep their own separation using standard see-and-avoid procedures. No fuel service is listed, and the private-use status means prior permission is required to operate.
The field rests at 920 feet above mean sea level.
06
Questions
- Where is Flying Crown (7IN2) located?
- Flying Crown is located in Hamilton, IN.
- Is Flying Crown a public or private airport?
- Flying Crown (7IN2) is a private-use airport, so prior permission from the owner is required before landing.
- How many runways does Flying Crown have?
- Flying Crown has a single runway, 18/36 at 2,800 feet of turf.
- What is the field elevation at Flying Crown?
- Flying Crown sits at 920 feet above mean sea level.
- Does Flying Crown have an instrument approach?
- No, Flying Crown has no published instrument approach procedures; it is used under visual flight rules.
- Does Flying Crown have an air traffic control tower?
- No, Flying Crown (7IN2) is a non-towered airport; pilots self-announce on the CTAF.