VFR
6OH1
MISSLER-BELLEVUE
BELLEVUE, OH
Elevation
760 ft
Control
Uncontrolled
CTAF
122.90
Runway
1,350 ft
About Missler-Bellevue
Missler-Bellevue, known as 6OH1 in FAA records, is a privately owned, non-towered airport in Bellevue, Ohio. The airport is served by a single runway, 09/27, which measures 1,350 feet long by 50 feet wide with a turf surface.
Operations are conducted under visual flight rules, as no instrument approach procedures are published. Arriving and departing aircraft announce their positions on the common traffic advisory frequency of 122.9 MHz. No fuel service is available. As a private-use facility, prior permission from the owner is required before landing.
The field rests at 760 feet above mean sea level.
07
Questions
- Where is Missler-Bellevue (6OH1) located?
- Missler-Bellevue is located in Bellevue, OH.
- Is Missler-Bellevue a public or private airport?
- Missler-Bellevue (6OH1) is a private-use airport, so prior permission from the owner is required before landing.
- How many runways does Missler-Bellevue have?
- Missler-Bellevue has a single runway, 09/27 at 1,350 feet of turf.
- What is the field elevation at Missler-Bellevue?
- Missler-Bellevue sits at 760 feet above mean sea level.
- Does Missler-Bellevue have an instrument approach?
- No, Missler-Bellevue has no published instrument approach procedures; it is used under visual flight rules.
- Does Missler-Bellevue have an air traffic control tower?
- No, Missler-Bellevue (6OH1) is a non-towered airport; pilots self-announce on the CTAF.
- What is the CTAF frequency at 6OH1?
- Missler-Bellevue's CTAF frequency is 122.9 MHz.