VFR
3TA7
JIM SEARS
BRIDGEPORT, TX
Elevation
900 ft
Control
Uncontrolled
UNICOM
122.80
Runway
2,500 ft
About Jim Sears
Located in Bridgeport, Texas, Jim Sears (3TA7) is a privately owned, non-towered airfield. Its lone runway, 17/35, measures 2,500 feet long and 70 feet wide with a turf surface.
No instrument approaches are published, so the field is used under visual flight rules. Field communications are conducted on UNICOM at 122.8 MHz. No fuel service is listed for the field. Prior permission from the owner is required to land at this private-use field.
The airport sits at 900 feet above mean sea level.
07
Questions
- Where is Jim Sears (3TA7) located?
- Jim Sears is located in Bridgeport, TX.
- Is Jim Sears a public or private airport?
- Jim Sears (3TA7) is a private-use airport, so prior permission from the owner is required before landing.
- How many runways does Jim Sears have?
- Jim Sears has a single runway, 17/35 at 2,500 feet of turf.
- What is the field elevation at Jim Sears?
- Jim Sears sits at 900 feet above mean sea level.
- Does Jim Sears have an instrument approach?
- No, Jim Sears has no published instrument approach procedures; it is used under visual flight rules.
- Does Jim Sears have an air traffic control tower?
- No, Jim Sears (3TA7) is a non-towered airport; pilots self-announce on the CTAF.
- What is the UNICOM frequency at 3TA7?
- Jim Sears's UNICOM frequency is 122.8 MHz.